|
|
Surveying of the actual state of the farm in Jekov.
Pracná, Petra ; Sláma, Jiří (referee) ; Bureš, Jiří (advisor)
This thesis is focused on surveying and documentation of the actual state of the farm in Jekov which is situated in Zvěstov village and it is part of Bořkovice land register. The first part of the thesis deals mainly with surveying itself, preparing of the geodetic control and planimetric and altimetric survey. The accuracy of the surveying is described. The second part of thesis is focusing mainly on creating the technical drawings. The specification of documentation of the historical buildings is mentioned.
|
|
|
Documentation bridge using terrestrial scanning
Ferencová, Anna ; Kalvoda, Petr (referee) ; Hanzl, Vlastimil (advisor)
The aim of this bachelor work is to scan with help of ground-based scanner bridge structure, which is part of the area of faculty of building VUT in Brno. Content of this work is theoretical base and consecutive practical elaboration of measured data. The result is effectuation of 3D model and examination of accuracy on control points.
|
|
|
Multifunctional house
Blaha, Ondřej ; Janík, Zdeněk (referee) ; Kalousek, Miloš (advisor)
This final thesis deals with a project documentation of a new multifunctional building. The building is located in Žďár nad Sázavou, in the Neumannova street. The building is divided into residential units and areas for a small company and a shop. The house is projected as a detached building with a partial basement and three floors. The residential part has 8 apartments in total – four apartments with three bedrooms, one with two bedrooms and three with one bedroom. It includes also cellars belonging to the apartments. The non-residential part includes space for a shop and an administrative part consisting of a reception, a meeting room, offices, stores and sanitary facilities. The main entrance in to the residential part is located on the level of staircase half landing. Main entrances into the non-residential parts are on the level of the ground floor. The house dispose with 24 parking places, two of them are dedicated for drivers with disabled parking permit. The building is based on concrete strip foundations. The external load-bearing structures are walled with clay masonry in the floors and with permanent formwork in the basement. The ceiling structure is formed with prestressed floor slabs. The house is covered with a warm flat roof. The staircase is pre-fabricated. In the thesis, there was put a stress on the appropriate dispositional, structural, technical and architectural design and on the safety in the use of the building. The drawing documentation is processed in the AutoCAD.
|
|
|
Design support for BricsCAD/AutoCAD
Hasal, Ondřej ; Bátora, Branislav (referee) ; Novotný, Jan (advisor)
This work deals with programing of a user interface in AutoCAD or BricsCAD which shall be used for drawing strong and weak current wiring in housing. I have used AutoCAD as the primary software and I have programed entire working menu in it. In BricsCAD I have programed sample menu to show how could we work with it and expand it. In the work I deal with change of design and properties of AutoCAD or BricsCAD. Part of the work deals with design and making of electrical symbols. I have dealt with how to use generated data without generating duplicates, when designing work environment in AutoCAD and BricsCAD. I also dealt with displaying and inserting of the created symbols into the drawings.
|
|
|
Apartment building
Hajiyev, Mustafa ; Machová, Petra (referee) ; Vajkay, František (advisor)
Předmětem této bakalářské práce je zpracování projektové dokumentace bytového domu. Nachází se v Brně-venkov, v katastrálním území Hrušovany u Brna. Bytový dům leží na svažitém pozemku a je orientován na severní stranu. Má čtyři nadzemní podlaží a v každém patře kolem budovy je balkon. Střecha je plochá betonová střecha se sklonem 5%. Celá konstrukce bytového domu je ze železobetonu a zdiva s hlavním využitím na stavební materiály od společnosti HELUZ. Všechny izolační materiály jsou od společnosti ISOVER. Výkresová dokumentace nezbytná pro realizaci tohoto bytového domu byla zpracována v počítačovém programu AutoCAD. Rovněž jsou zohledněna řešení požární bezpečnosti pro tento projekt.
|
|
| |
|
| |
|
| |
|
|
Design systems used in the field of electrical apparatuses
Stejskal, Jiří ; Krejčí, Jan (referee) ; Valenta, Jiří (advisor)
Bachelor´s thesis is engaged on the base of submitter´s requests company OEZ, s.r.o. and is divided into two parts. The first part of work deals with the most often used 2D CAD systems that are used by designers according to their answers in the area of suggestion of electric switchboards low voltage. In the work are described main possibilities of these systems, then what kinds of data format are supported by them. In the second part of the work are described programs established on calculation of warming switchboards. It goes about programs, which supply concrete producer of switchboard case, and further programs based on method of final elements and method of final volume, which enable graphic representation of results.
|
|
|
3D model of Church of the Virgin Mary of the Snow in Velké Karlovice
Slováček, Jaroslav ; Hanzl, Vlastimil (referee) ; Bartoněk, Dalibor (advisor)
The thesis is focused on the creation process of the 3D model of Panna Marie Sněžná church in Velké Karlovice, which is based on geodetic measuring. The introduction part deals with the historical context, localization and general description of the object. Furthermore, there is the introduction of methods of a 3D model production. The majority of the work contains description of method utilized for 3D model creation and that was used by us. This model was created in AutoCAD 2018 program.
|
guest ::
